Juniper EX4300 Series

EX4300 Switch Hardware and CLI Terminology Mapping
This topic describes the hardware terms used in EX4300 switch documentaon and the corresponding
terms used in the Junos OS CLI. See Table 9 on page 44.
Table 9: CLI Equivalents of Terms Used in the Documentaon for EX4300 Switches
Hardware
Item (CLI)
Descripon (CLI) Value Item In
Documentaon
Addional Informaon
Chassis One of the
following:
• EX4300-24T
• EX4300-24P
• EX4300-32F
• EX4300-48T
•
EX4300-48P
•
EX4300-48MP
– Switch chassis "Idenfying EX4300
Switch Models" on
page 42
Roung
Engine ( n )
One of the
following:
• EX4300-24T
• EX4300-24P
• EX4300-32F
• EX4300-48T
•
EX4300-48P
•
EX4300-48MP
n is a value in the
range 0 through 9.
• On a standalone
switch, the default
value is 0.
• On a Virtual
Chassis
conguraon, the
values correspond
to the member IDs
of switches
congured in the
primary role and
the backup role in
the Virtual Chassis.
Roung Engine –
44