Juniper EX4300 Series

Table 65: SFP Network Port Connector Pinout Informaon (Connued)
Pin Signal Descripon
13 RD+ Receiver noninverted data output
14 VeeR Module receiver ground
15 VccR Module receiver 3.3 V supply
16 VccT Module transmier 3.3 V supply
17 VeeT Module transmier ground
18 TD+ Transmier noninverted data input
19 TD- Transmier inverted data input
20 VeeT Module transmier ground
Table 66: SFP+ Network Port Connector Pinout Informaon
Pin Signal Descripon
1 VeeT Module transmier ground
2 TX_Fault Module transmier fault
3 TX_Disable Transmier disabled
4 SDA 2-wire serial interface data line
5 SCL- 2-wire serial interface clock
6 MOD_ABS Module absent
159