• A mixture of QFX5100, QFX3600, QFX3500, and EX4300 members except EX4300-48MP and
EX4300-48MP-S switches. EX4300 switches as the primary or backup is not supported; use
QFX5100 switches in these roles whenever possible.
An all EX4300 member is simply considered an EX4300 Virtual Chassis (see Understanding EX Series
Virtual Chassis).
If the QSFP+ interfaces are not available for VCP, 10-Gigbit interfaces can be used.
All members of the Virtual Chassis are required to run the same Junos OS Release. You can check the
version and release by issuing the show chassis version CLI command.
216
To Next Page
Loading...
