Juniper EX4300 Series User Manual

• To clean the transceiver canal, use an appropriate ber-cleaning device such as RIFOCS Fiber
Opc Adaptor Cleaning Wands (part number 946). Follow the instrucons in the cleaning kit you
use.
• Aer cleaning the transceiver, make sure that the connector p of the ber-opc cable is clean.
Use only an approved alcohol-free ber-opc cable cleaning kit such as the Opptex Cletop-
S
®
Fiber Cleaner. Follow the instrucons in the cleaning kit you use.
318

Juniper EX4300 Series Specifications

General

Product Series	EX4300 Series
Power Consumption	Varies by model and configuration
Virtual Chassis Technology	Up to 10 switches
Software	Junos OS
Ports	24-port and 48-port models
10GBASE SFP+ Ports	Up to 8 ports
40GBASE QSFP+ Ports	2
Uplink Ports	Up to 4 ports
Jumbo Frames	Up to 9216 bytes
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 90% noncondensing
Input Voltage	100 to 240V AC
Power Supply	AC or DC
Power Supply Options	AC or DC
Stacking	Yes
Layer 2 Features	Includes VLAN, STP, RSTP, MSTP, LACP
Layer 3 Features	OSPF, BGP
Management	CLI, Web GUI, SNMP
Security Features	DHCP snooping
QoS	8 queues per port, DSCP
Storage Temperature	-40°C to 70°C