Juniper EX4300 Series User Manual

Table 93: Viewing System Log Messages (Connued)
Field Funcon Addional Informaon
Event ID Displays a code that uniquely idenes the
message.
The prex on each code idenes the message
source, and the rest of the code indicates the
specic event or error.
The event ID begins with a prex that
indicates the generang soware process.
Some processes on a switch do not use codes.
This eld might be blank in a message
generated from such a process.
An event can belong to one of the following
type categories:
• Error—Indicates an error or failure
condion that might require correcve
acon.
•
Event—Indicates a condion or occurrence
that does not generally require correcve
acon.
Event
Descripon
Displays a more detailed explanaon of the
message.
Time Displays the me at which the message was
logged.
SEE ALSO
Check Acve Alarms with the J-Web Interface
Understand Alarm Types and Severity Levels on EX Series Switches
332

Juniper EX4300 Series Specifications

General

Product Series	EX4300 Series
Power Consumption	Varies by model and configuration
Virtual Chassis Technology	Up to 10 switches
Software	Junos OS
Ports	24-port and 48-port models
10GBASE SFP+ Ports	Up to 8 ports
40GBASE QSFP+ Ports	2
Uplink Ports	Up to 4 ports
Jumbo Frames	Up to 9216 bytes
Operating Temperature	0°C to 45°C
Relative Humidity	5% to 90% noncondensing
Input Voltage	100 to 240V AC
Power Supply	AC or DC
Power Supply Options	AC or DC
Stacking	Yes
Layer 2 Features	Includes VLAN, STP, RSTP, MSTP, LACP
Layer 3 Features	OSPF, BGP
Management	CLI, Web GUI, SNMP
Security Features	DHCP snooping
QoS	8 queues per port, DSCP
Storage Temperature	-40°C to 70°C