Juniper EX4300 Series

Table 9: CLI Equivalents of Terms Used in the Documentaon for EX4300 Switches (Connued)
Hardware
Item (CLI)
Descripon (CLI) Value Item In
Documentaon
Addional Informaon
One of the
following:
• 24x
10/100/1000B
ASE-T
• 32x1G SFP
• 48x
10/100/1000B
ASE-T
•
24x10M/
100M/1G
Base-T & 24x
100M/1G/
2.5G/5G/10G
Base-T
PIC 0
• In 24-port and 48-
port switches—PIC
0 stands for built-
in network ports
numbered 0
through 23 or 0 or
through 47.
• In 32-port
switches—PIC 0
stands for built-in
network ports
followed by SFP+
uplink ports. The
network ports are
labeled 0 through
31 and the SFP+
uplink ports are
labeled 0 through
3. In the CLI
output, the
network ports are
numbered 0
through 31 and the
SFP+ uplink ports
are numbered 32
through 35.
"EX4300 Switches
Hardware Overview"
on page 2
46