Keysight EDU33210 Series - Modulating Waveform Frequency

Press [Modulate] > Type AM > Type FM.
Then choose the modulating shape: Press Shape.
SCPI Command
[SOURce[1|2]:]AM:INTernal:FUNCtion <function>
[SOURce[1|2]:]FM:INTernal:FUNCtion <function>
Modulating Waveform Frequency
Modulating frequency (internal source): minimum is 1 μHz, and the maximum values vary by function.
Front Panel Operations
Press [Modulate] > Type AM > AM Freq.
or
Press [Modulate] > Type AM > Type FM > FM Freq.
Then enter the AM or FM frequency with the knob and keypad. If you use the keypad, select a unit prefix to finish.
Keysight EDU33210 Series User's Guide
103