Keysight EDU33210 Series - Safety and EMC Requirements; Environmental Conditions

Safety and EMC Requirements
This power supply is designed to comply with the following safety and EMC (Electromagnetic Compatibility)
requirements:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation. The table below shows the general
environmental requirements for this instrument.
Environmental Condition Requirement
Temperature Operating condition: 0 °C to 55 °C
Storage condition: –40 °C to 70 °C
Humidity Operating/Storage condition: Up to 80% RH at temperatures up to 40 °C (non-
condensing)
Altitude Up to 3000 m
Pollution degree 2
Overvoltage Category II
Power Supply and Line Frequency 100/120 V, 100/240 V
50/60 Hz
Power Consumption <45 W
MAINS Supply Voltage Fluctuations Mains supply voltage fluctuations are not to exceed 10% of the nominal supply voltage
14
Keysight EDU33210 Series User's Guide