You can copy, rename, or delete files or folders. Deleting a folder removes all of the files within the folder, so be sure
that you want to delete all of the files within the folder.
The most important softkey is Switch Pane, which allows you to specify the location of the action to perform. Once
you have chosen the location of the action to perform, press Select to select the file to manage. Once you are
completely prepared to execute the task, press Rename, Copy, or Delete.
SCPI Command
See "MEMory" and "MMEMory subsystems" in the EDU33210 Series Programming Guide.
Self-Test
A limited power-on self-test occurs when you turn on the instrument to assure you that the instrument is
operational. You can also run a more complete self-test. For details, see "Self-Test Procedures" in the EDU33210
Series Service Guide.
Front Panel Operations
Press [System] > Instr. Setup > Self Test.
SCPI Command
*TST
Firmware Revision Query
Send *IDN? to determine which revision of firmware is currently installed. The query returns a string of the form:
Keysight Technologies,[Model Number],[10-char Serial Number],[Firmware Revision Number]
Firmware revision number example: K-01.00.04-01.00-01.00-01.00-01.00
Front Panel Operations
Press [System] > Help > About. Scan the QR code shown to view the documentation related to this instrument.
SCPI Command
*IDN?
SCPI Language Version Query
The instrument complies with the rules and conventions of the present version of SCPI (Standard Commands for
Programmable Instruments). Use SYSTem:VERSion? to determine the SCPI version with which the instrument
complies. The query returns a string in the form "YYYY.V", representing the year and version number for that year (for
example, 1999.0).
I/O Config
See Remote Interface Connections and Remote Interface Configuration for more details.
148
Keysight EDU33210 Series User's Guide
To Next Page
Loading...
Need help?
General
