– DnRamp with 0% symmetry
– Noise: White Gaussian noise
– PRBS: Pseudo Random Bit Sequence (polynomial PN7)
– Arb: Arbitrary waveform
You can use noise as the modulating wave shape, but you cannot use noise or DC as the carrier waveform.
Front Panel Operation
Press [Modulate] > Type AM > Type PM > Shape Sine.
SCPI Command
SCPI:[SOURce[1|2]:]PM:INTernal:FUNCtion <function>
Modulating Waveform Frequency
Modulating frequency: default 10 Hz, minimum 1 μHz; maximum varies by model, function, and output voltage, as
shown here.
Front Panel Operation
Press [Modulate] > Type AM > Type PM > PM Freq.
Then set the modulating waveform frequency with the knob and keypad. If you use the keypad, select a prefix unit to
finish.
Keysight EDU33210 Series User's Guide
109
To Next Page
Loading...
