Keysight EDU33210 Series User Manual

SCPI Command
[SOURce[1|2]:]AM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
[SOURce[1|2]:]FM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
Modulation Depth (AM)
The modulation depth is a percentage that represents the amplitude variation. At 0% depth, the amplitude is one
half of the carrier’s amplitude setting. At 100% depth, the amplitude varies according to the modulating waveform,
from 0% to 100% of the carrier’s amplitude.
– Modulation depth: 0% to 120%. The default is 100%.
– Even at greater than 100% depth, the instrument will not exceed ±5 Vpeak on the output (into a 50 Ω load). To
achieve modulation depth greater than 100%, output carrier amplitude may be reduced.
Front Panel Operations
Press [Modulate] > Type AM > AM Depth. Use the numeric keypad or the knob and arrows to set a desired value. If
you use the keypad, press Percent to finish.
104
Keysight EDU33210 Series User's Guide

Keysight EDU33210 Series Specifications

General

Brand	Keysight
Model	EDU33210 Series
Category	Portable Generator
Language	English