If the message contains more information than will fit on the display, press the down arrow softkey to view the
remaining information.
Press OK to exit Help.
Local Language Help
All messages, context-sensitive help, and help topics are available in English, French, German, Spanish, Simplified
Chinese, Traditional Chinese, Japanese, Korean, and Russian. Softkey labels and status line messages are not trans-
lated (i.e. always in English). To select the language, press [System] > User Settings > Language. Then select the
desired language.
Update the Firmware
Do not turn off the instrument during the update.
Press [System] > Help > About to determine the version number of the instrument's firmware currently installed.
Go to www.keysight.com/find/EDU33211A-sw to find the latest firmware version. If this matches the version
installed on your instrument, there is no need to continue with this procedure. Otherwise, download the firmware
update utility and a ZIP file of the firmware. Detailed firmware update instructions are located on the download page.
Remote Interface Connections
This section describes how to connect to the various communication interfaces to your instrument. For further
information about configuring the remote interfaces, refer to Remote Interface Configuration.
If you have not already done so, install the Keysight IO Libraries Suite, which can be found at www.key-
sight.com/find/iolib. For detailed information about interface connections, refer to the Keysight Technologies
USB/LAN/GPIB Interfaces Connectivity Guide included with the Keysight IO Libraries Suite.
Keysight EDU33210 Series User's Guide
37
To Next Page
Loading...
Need help?
General
