Keysight EDU33210 Series User Manual

Instrument Power On State
You can configure instrument to power-down state from location 0 on power up. The factory default is to recall
factory default state at power-on.
Front Panel Operations
Press [System] > Power On Setting > Power On Factory Default or Power On State 0.
SCPI Command
MEMory:STATe:RECall:AUTO {ON|1|OFF|0}
Error Conditions
Up to 20 command syntax or hardware errors can be stored in the error queue. See "SCPI Error Messages" in the
EDU33210 Series Programming Guide for more information.
Front Panel Operations
Press [System] > Help > Error View.
SCPI Command
SYSTem:ERRor?
Beeper Control
The instrument normally beeps when an error is generated from the front panel or remote interface.
This setting is non-volatile; it will not be changed by power cycling or *RST.
Front Panel Operations
Press [System] > User Settings > Beeper ON | OFF.
SCPI Command
SYSTem:BEEPer:STATe {ON|1|OFF|0}
SYSTem:BEEPer
Key Click
The instrument emits a click when a front panel key or softkey is pressed.
This setting is non-volatile; it will not be changed by power cycling or *RST.
Front Panel Operations
Press [System] > User Settings > Key Click ON | OFF.
146
Keysight EDU33210 Series User's Guide

Keysight EDU33210 Series Specifications

General

Brand	Keysight
Model	EDU33210 Series
Category	Portable Generator
Language	English