Keysight EDU33210 Series - Configuring Basic Output

Set the Output Frequency
The default frequency is 1 kHz. You can change the frequency, and you can specify frequency in units of period
instead of Hz.
Press [Parameter] > Frequency.
– Use the knob to change the numeric value and/or use the cursor arrows to move the cursor to the next or previous
digit, or
– Use the numeric keypad to set a numeric value. Select a prefix unit (µHz, mHz, Hz, kHz, or MHz) to confirm your
changes.
Press [Units] > Frequency Periodic to change the units to period instead of frequency.
Keysight EDU33210 Series User's Guide
25