SCPI Command
[SOURce[1|2]:]AM[:DEPTh] {<depth_in_percent>|MINimum|MAXimum}
Double Sideband Suppressed Carrier AM
The instrument supports two forms of amplitude modulation, "Normal" and Double Sideband Suppressed Carrier
(DSSC). In DSSC, the carrier is not present unless the modulating signal has an amplitude greater than zero.
Front Panel Operations
Press [Modulate] > Type AM > MORE 1 / 2 > DSCC ON | OFF > DSCC ON | OFF.
SCPI Command
[SOURce[1|2]:]AM:DSSC{ON|1|OFF|0}
Keysight EDU33210 Series User's Guide
105