Keysight EDU33210 Series - Symmetry (Ramp Waves)

Front Panel Operations
Press [Waveform] > Square > Duty Cycle. Use the numeric keypad or the knob and arrows to set a desired value. If
you use the keypad, press Percent to confirm your changes.
SCPI Command
[SOURce[1|2]:]FUNCtion:SQUare:DCYCle {<percent>|MINimum|MAXimum}
The APPLy command sets the duty cycle to 50%.
Symmetry (Ramp Waves)
Applies to ramp waves only. Symmetry represents the fraction of each cycle that the ramp wave is rising (assuming
waveform is not inverted).
Keysight EDU33210 Series User's Guide
89