Keysight EDU33210 Series - Sum Amplitude

SCPI Command
[SOURce[1|2]:]SUM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
Sum Amplitude
The Sum Amplitude represents the amplitude of the signal added to the carrier (in percent of carrier amplitude).
– Amplitude setting: 0 to 100% of carrier amplitude, 0.01% resolution.
– Sum Amplitude remains a constant fraction of carrier amplitude and tracks carrier amplitude changes.
Front Panel Operations
Press [Modulate] > Type Sum > Sum Ampl.
Use the numeric keypad or the knob and arrows to set a desired value. If you use the keypad, press Percent to finish.
120
Keysight EDU33210 Series User's Guide