Keysight EDU33210 Series - Page 125

Front Panel Operations
1. Press [Units] > Sweep StrtStop.
2. Press [Sweep] > Start Freq or Stop Freq. Use the numeric keypad or the knob and arrows to set a desired value. If
you use the keypad, select a prefix unit to finish.
or
1. Press [Units] > Sweep CntrSpan.
2. Press [Sweep] > Center or Span. Use the numeric keypad or the knob and arrows to set a desired value. If you use
the keypad, select a prefix unit to finish.
Keysight EDU33210 Series User's Guide
125