Keysight EDU33210 Series User Manual

2. Press [Parameter] > High Level. Using the numeric keypad or knob and arrows, select a value of 1.0 V. (If you are
using the keypad, you will need to select the V unit softkey to enter the value.)
3. Press the Low Level softkey and set the value. Again, use the numeric keypad or the knob to enter a value of 0.0 V.
These settings (high-level = 1.0 V and low-level = 0.0 V) are equivalent to setting an amplitude of 1.0 Vpp and an
offset of 500 mV.
30
Keysight EDU33210 Series User's Guide

Keysight EDU33210 Series Specifications

General

Brand	Keysight
Model	EDU33210 Series
Category	Portable Generator
Language	English