3. Configure the "DNS Setup" (optional)
DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses. Ask your network
administrator whether DNS is in use, and if it is, for the host name, domain name, and DNS server address to use.
Normally, DHCP discovers DNS address information; you only need to change this if DHCP is unused or not func-
tional. To manually configure the addressing of the instrument, use the Services softkey to set Auto DNS to OFF.
a. Set the "hostname." Press [Back] >Host Name and enter the hostname. A hostname is the host portion of the
domain name, which is translated into an IP address. The hostname is entered as a string using the softkeys
provided. The hostname may include letters, numbers, and dashes ("-").
The instrument is shipped with a default hostname with the following format: K-{modelnumber}-{serialnumber},
46
Keysight EDU33210 Series User's Guide
To Next Page
Loading...
Need help?
General
