Keysight EDU33210 Series User Manual

1. Select the desired storage destination.
Press [System] > Store/Recall > Store Settings > Destination.
If choose to store the instrument state in the instrument’s non-volatile internal memory, select Int. Proceed to step
2.
If you choose to store the state file (.sta) in a connected external USB flash drive, select Ext. Skip to step 3.
Make sure to connect a USB flash drive before proceed. If a USB flash drive is not connected, the
menus under Destination Int | Ext will be grayed out.
70
Keysight EDU33210 Series User's Guide

Keysight EDU33210 Series Specifications

General

Brand	Keysight
Model	EDU33210 Series
Category	Portable Generator
Language	English