600 Cycle Maintenance Steps
KVAL 994-X Operation/Service Manual
5-6
Lubricate inside of Hopper
Lubricate the inside of the Hoppers
with a light coat of dry silicone
spray.
Lubricate the input to the screw
drop hoses. Provides an easier
screw drop.
Do not over-spray oil.
Empty Dust Collection Units
Check and empty any dust collection units. Clean any dust filters. Dust collection systems vary
from machine to machine. Follow manufacturers directions to empty dust collection units.
Filters
Dust Collection
Containers
FIGURE 5- 14. Typical Dust Collection Unit
To Next Page
Loading...
