Kval 994-X - Grease Ball Screw Bearings; Clean Bearing Shafts

3,000 Cycle Maintenance Steps
KVAL 994-X Operation/Service Manual
5-10
Grease Ball Screw Bearings
Grease ball screw bearings (if applicable). For a table of lubrication types to use, Lubrication
Schedule. For locations to lubricate, See Ball Screws (If Applicable)
Clean Bearing Shafts
Clean all bearing shafts with clean, dry
cloth.
Spray shaft with silicone oil and clean
build up grime and dirt.