3,000 Cycle Maintenance Steps
5-9
KVAL 994-X Operation/Service Manual
Inspect Airlines
Inspect all airlines for kinks, rubbing
and leaks. Perform pull test on push on
hose connectors.
Check all airline connections, assem-
blies, air valves, and hoses.
Check from source to end assembly.
Check Hoses for kinks and rubbing, manifold
connections and Air Cylinder connections.
Refill Lubricators
Ensure Air is turned off.
Refill all lubricators. Replace fluid if
milky or discolored. Use ab ISO 32 stan-
dard hydraulic oil (KVAL PN: SYS-
LUBEG).
Slide locking switch down
twist bowl and remove.
Refill bowl. Reverse action
when installing trap.
To Next Page
Loading...
