Powering Operations for the 994-X
2-35
KVAL 994-X Operation/Service Manual
Emergency Shutdown and Recovery
There are emergency shutdown (E-Stop) switches located at key points
around the machine.
Note: Depending on options of the machine, the E-Stop but-
tons may be located at various locations.
The E-Stop switches are to be used when the machine is out of control
or is about to damage personnel or equipment.
When an E-Stop switch is activated, power to the machine is killed.
The machine responds, in the same way, if you press the STOP button on the operator's station.
To Next Page
Loading...
