Kval 994-X - Inspect Ball Rail Shafts; Clean and Lubricate Slides, Cylinder Rods and Bearing Shafts; Clean Inside Hopper

12,000 Cycle Maintenance Steps
KVAL 994-X Operation/Service Manual
5-12
Inspect Ball Rail Shafts
Inspect ball rail shafts for pitting or abrasions.
Example of a Pitted Ball Rail
Clean and Lubricate Slides, Cylinder Rods and Bearing Shafts
Clean and lubricate all slides and cylinder rods with dry silicone spray.
Clean inside Hopper
Clean inside hopper with dry sili-
cone oil and a 3M ScotchBrite
®
pad (or equivalent). Wipe dry
with a clean dry rag