2-1
CHAPTER 2 Operation of the 994-X
This chapter describes components, assemblies, and the user interface of the KVAL 994-X Door
Hanging System. The content is geared to help operators understand the basic operation of the
994-X. Included are instructions to calibrate the machine and process a door.
Chapter 2 at a Glance
TABLE 2- 3.
Section Name Summary Page
Operator’s Tour
Descriptions of the operation of the
parts and assemblies
of the
machine
Page 2-2
Quick Start
A summary of the steps to machine a door. Page 2-31
Powering Operations
Descriptions of power up, power down, h
oming, and emergency
stops
Page 2-33
Description of the User
Interfac
e Screen
Descriptions of the Operator Interface Screens Page 2-36
To Next Page
Loading...
