Kval 994-X - Page 70

Menu Maps of the Operator Screens
KVAL 994-X Operation/Service Manual
2-38
.
Setup Screens
Hinge #1-#4 Pre-Drill
Main Calibration
Router
CC Router
Chisels
Pre-Drill
Hinge Carriage
Pre-Drill Template
Lock Location
• 6’-8” (RH,LH)
• 7’-0” (RH,LH)
• 8”-0” (RH,LH)
Feed Sys timing
Jamb Shelf Height
Plate Fast Timers
Plate Slow Timers
Diagnostics
990-H Log screen
Total Door Count
Daily Door Count
See “About the Diagnostic Screen” on
page 2-52.
See “About the Machine Calibration
Screen” on page 2-43.
Chisels
Upper Left Chisel
Upper Right Chisel
Lower Left Chisel
Lower Right Chisel