3-1
CHAPTER 3 Calibration of 994-X
This chapter describes the steps to calibrate the 994-X, Door Pre-Hanging Machine.
Chapter 3 at a Glance
TABLE 3- 1.
Section Name Summary Page
About Calibration
The Benefits of calibration and when to calibrate. Page 3-2
About the Calibration Routine
Specifications of the C
alibration Routine. Page 3-4
Run the Calibration Routine
Details on running a calibration reference for the
Front. Page 3-6
Check and Adjust Front
Section Calibrations
Details on using the calibration screens to adjust he Front section
tools
Page 3-7
Ch
eck and Adjust Back Section
Calibrations
Deta
ils calibration the Back section tools Page 3-17
To Next Page
Loading...
