3
3.5 Specifying a Zoom Setting
3-14
Basic Copy Operations Chapter 3
Zooming
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
G Touch and to select the desired zoom ratio. Each time a key is
touched, the zoom ratio is increased or decreased by an increment of ×0.001.
Custom Sizing (Manual Zoom Settings)
G Entering the zoom ratio
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
Using the keypad, type in the desired zoom ratio.
Up to two zoom ratios specified using the keypad can be stored.
G Vertical and Horizontal Scaling (X/Y Zoom settings)
The copy size can be changed by specifying different scaling proportions (between
×0.250 and ×4.000) for the vertical and the horizontal dimensions.
To select a Zoom setting
1 Touch [Zoom].
A screen appears, showing the available Zoom settings.
2 Select the desired
Zoom setting.
To Next Page
Loading...
Need help?
General
