Kyocera KM-C2230

10.11 Supervising Machine Use (Volume Track (E.K.C.) Functions)
10
10-91
Utility Mode Operations Chapter 10
Canceling Volume Track Mode (E.K.C.)
The procedure for canceling Volume Track mode (E.K.C.) is described below.
✎
Reminder!
In order to cancel the Volume Track mode (E.K.C.), all Volume Track Data
(E.K.C.) counters must be initialized.
If “No” is selected in the Initialize screen, the Volume Track Data (E.K.C.)
counters are not initialized; however, the Volume Track mode (E.K.C.) cannot
be canceled.
In order to keep Volume Track Data (E.K.C.) counter values when canceling
Volume Track mode (E.K.C.), print the data.
For details on printing Volume Track Data (E.K.C.) counters, refer to “Printing
Volume Track Data (E.K.C.) Counters” on page 10-100.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Volume Track (E.K.C.)].
5 Touch [Volume Track
Mode (E.K.C.)].