10
10.8 Administrator Settings
10-50
Utility Mode Operations Chapter 10
Setting the “Reprint” Function
This function is used to specify whether or not the last job printed can be recalled
and printed again. (The default setting is “Yes”.)
✎
Reference
For details on the memory recall feature, refer to “Reprint Screen” on page 8-23.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [3/4].
6 Touch [Reprint].
7 Touch the key for the
desired setting.
8 Touch [Enter].
9 Touch [Exit], in the next
three screens that
appear.
The Basic screen
appears again.
To Next Page
Loading...
