7
7.8 Inserting Paper Between Transparencies (“OHP Interleave” Function)
7-22
Application Functions Chapter 7
7.8 Inserting Paper Between Transparencies (“OHP
Interleave” Function)
After each overhead transparency is copied, a page from a different paper source
can be added to the stack of transparencies as an overleaf. In order to use this
function, the overhead transparencies should be loaded into the 1st drawer.
To use the “OHP Interleave” function
1 Load interleaf paper with the same size and orientation as the overhead
transparencies into any paper drawer other than the 1st drawer.
2 Position the document(s) to be copied.
✎
Reference
For details, refer to “Feeding the Document” on page 2-41.
3 Touch [Application].
The Application screen appears.
4 Touch [OHP
Interleave].
To Next Page
Loading...
