10.8 Administrator Settings
10
10-37
Utility Mode Operations Chapter 10
Setting the “Locked Jobs Auto Delete Time” Function
This function is used to specify the length of time until locked jobs are automatically
deleted.
(The default setting is “No”.)
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [Locked Jobs
Auto Delete Time].
6 Using the keypad, type
in the desired length of
time.
(1 to 99 hours)
❍ To prevent locked
jobs from
automatically being
deleted, touch [No].
✎
Additional Information
To change the specified length of time, press the [C] (clear) key. After the
[C] (clear) key is pressed, “No” is selected.
To Next Page
Loading...
