6
6.6 Setting the “Key Repeat Start/Interval” Function (Accessibility Mode)
6-12
Additional Copy Operations Chapter 6
6.6 Setting the “Key Repeat Start/Interval” Function
(Accessibility Mode)
The length of time until a value begins to change when a touch panel key for
changing the value is held down can be specified. (The default setting for the start
time is 0.8 second and the default setting for the repeat interval is 0.3 second.)
✎
Condition
The settings for the repeat feature are only applied in the Enlarge Display mode;
they are not applied when the screen is displayed normally.
✎
Hint
The Enlarge Display mode is limited to basic copy functions. The function and
setting names and the illustrations are displayed at a larger size so that they can
be seen more easily. For details, refer to the Enlarge Display Mode User’s
Guide.
1 Press the [Accessibility] key.
To Next Page
Loading...
