10
10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10-20
Utility Mode Operations Chapter 10
Setting the “Criss Cross” Function
This function is used to set whether or not copies will be sorted in a crisscross
pattern if the necessary conditions are met while using the “Sort” setting.
(The default setting is “Yes”.)
✎
Reference
For details on crisscross sorting, refer to “Crisscross Sorting (Crisscross
Feeding)” on page 3-9.
1 Press the [Utility] key.
2 Touch [User’s Choice: 2].
3 Touch [Criss Cross].
4 Touch the key for the
desired setting.
5 Touch [Enter].
6 Touch [Exit], and then
touch [Exit] in the Utility
screen.
The Basic screen
appears again.
To Next Page
Loading...
