Kyocera KM-C2230

10.8 Administrator Settings
10
10-63
Utility Mode Operations Chapter 10
Setting the “Add Prefix/Suffix” Function
This function is used to specify whether or not a prefix/suffix is added when recalling
or entering an address in Scan mode or Box mode. (The default setting is “No”.)
✎
Reference
For details on box function, refer to the KM-C2230 Printer Controller User’s Guide.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [4/4].
6 Touch [Add Prefix/
Suffix].