10
10.8 Administrator Settings
10-52
Utility Mode Operations Chapter 10
Setting the “HDD Lock” Function
This function is used to select whether or not the hard disk is locked. If the hard disk
is locked, the password must also be specified in order to unlock it.
(The default setting is “No”.)
✎
Condition
[HDD Lock] appears only if the optional hard disk is installed.
✎
Additional Information
Locking the hard disk prevents unauthorized access to the hard disk.
By selecting the “HDD Lock” function when the hard disk is already locked, the
password can be changed or the lock setting for the hard disk can be removed.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [3/4].
6 Touch [HDD Lock].
To Next Page
Loading...
