Kyocera KM-C2230

7
7.10 Improving Color Copy Quality (Color Image Adjustment Parameters)
7-32
Application Functions Chapter 7
To adjust the “Red” parameter
This parameter is used to adjust the level of red in the image.
1 Touch [Application],
and then touch [Color
Image Adjustment].
2 In the Color Image
Adjustment screen,
touch [Red].
3 Touch and
to select the desired
setting, and then touch
[Enter].
❍ To cancel the “Red”
function, touch
[Cancel] in the Red
screen.
✎
Additional Information
A sample copy can be printed in order to check the print result with the current
settings. For details, refer to “To make sample copies” on page 7-40.