Kyocera KM-C2230

2.10 Feeding the Document
2
2-41
Before Making Copies Chapter 2
2.10 Feeding the Document
Loading the Document Into the Reverse Automatic Document Feeder
The reverse automatic document feeder automatically feeds in, scans, then feeds
out each page of a multi-page document, one page at a time. The correct type of
document must be loaded in order for the reverse automatic document feeder to
function properly.
✎
Reference
For details on the correct types of documents that can be loaded, refer to
“Appropriate Document Types (Using the Reverse Automatic Document
Feeder)” on page 5-2.
For details on loading documents with mixed paper sizes, refer to “Copying
Documents of Mixed Sizes (“Mixed Original” Function)” on page 6-3.
1 Slide the adjustable document
guides to fit the size of the
document.
❍ If large-sized documents are
to be loaded, pull out the
document support.
2 Load the document pages to be
copied face up into the document
feed tray.
❍ Load the document pages so
that the top of the document
is toward the rear or the right
side of the machine.
Document support
Document guide