10.8 Administrator Settings
10
10-61
Utility Mode Operations Chapter 10
Setting the “Panel Reset Timer” Function
This function is used to specify the length of time after the last operation until all
functions automatically return to their default settings. (The default setting is 1 min.)
✎
Reference
For details, refer to “Turning the Machine On and Off” on page 2-17.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [4/4].
6 Touch [Panel Reset
Timer].
7 Press the [C] (clear) key.
The currently specified value is erased, and [No] is selected.
To Next Page
Loading...
