Kyocera KM-C2230

7
7.9 Making Bound Booklets (“Booklet Original” Function)
7-24
Application Functions Chapter 7
7.9 Making Bound Booklets (“Booklet Original”
Function)
Booklets with their staples removed can be copied and bound to create booklet
copies.
✎
Condition
The “Booklet Original” function is only available if the optional finisher DF-626 is
installed.
To use the “Booklet Original” function
1 Remove the staples from the booklet document to be copied, and then position
it.
✎
Additional Information
The document can be positioned in either of the following ways.
When placed on the original glass
Position each page spread out in the following order: the side with the first
page, the side with the second page, the side with the third page, etc.