10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10
10-25
Utility Mode Operations Chapter 10
Setting the “4in1 Copy Order” Function
This function is used to specify the copy order during 4in1 copying. (The default
setting is “”.)
1 Press the [Utility] key.
2 Touch [User’s Choice: 2].
3 Touch [2/3].
4 Touch [4in1 Copy
Order].
5 Touch the key for the
desired setting.
6 Touch [Enter].
7 Touch [Exit], and then
touch [Exit] in the Utility
screen.
The Basic screen
appears again.
To Next Page
Loading...
