Kyocera KM-C2230 - Specifying Default Settings (Users Choice: 1 Functions); Setting the Key Click Sound Function

10
10.4 Specifying Default Settings (User’s Choice: 1 Functions)
10-10
Utility Mode Operations Chapter 10
10.4 Specifying Default Settings (User’s Choice: 1
Functions)
Setting the “Key Click Sound” Function
This function is used to specify whether or not a confirmation beep is sounded each
time a key on the touch panel or a key in the control panel is pressed. (The default
setting is “ON”.)
1 Press the [Utility] key.
2 Touch [User’s Choice: 1].
3 Touch [Key Click
Sound].
4 Touch the key for the
desired setting.
5 Touch [Enter].
6 Touch [Exit], and then
touch [Exit] in the Utility
screen.
The Basic screen
appears again.