3.8 Selecting Copy Settings
3
3-37
Basic Copy Operations Chapter 3
3.8 Selecting Copy Settings
The desired type of copy can be selected.
For details on specifying the type of original, refer to “Selecting Original Settings”
on page 3-27.
The following Copy settings are available.
✎
Condition
Double-sided (“2” setting), double-sided 2in1 (“2-2in1” setting), double-sided
4in1 (“2-4in1” setting), and booklet (“Booklet” setting) copying are only available
if the optional automatic duplex unit is installed.
Booklet-binding (“Bind” setting) and center-erasing (“Center Erase” setting) are
available only if the optional finisher DF-626 is installed.
To Next Page
Loading...
