Kyocera KM-C2230

10
10.8 Administrator Settings
10-46
Utility Mode Operations Chapter 10
Setting the “LDAP Search” Function
This function is used to select whether or not an LDAP search is allowed in Scan
mode and Box mode.
(The default setting is “Prohibit”.)
✎
Reference
For details on the Scan mode and Box mode, refer to the KM-C2230 Printer
Controller User’s Guide.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [2/4].
6 Touch [LDAP Search].
7 Touch the key for the
desired setting.
8 Touch [Enter].
9 Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.