10.8 Administrator Settings
10
10-65
Utility Mode Operations Chapter 10
Setting the “Prefix/Suffix Registration” Function
This function is used to register prefixes/suffixes that can be added when the “Add
Prefix/Suffix” function is set to “Yes”. Up to 8 prefixes/suffixes can be registered.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [4/4].
6 Touch [Prefix/Suffix
Registration].
7 Touch and
to select the desired
program number.
8 Touch [Prefix].
To Next Page
Loading...
