10.10 Specifying Expert User Mode Functions
10
10-77
Utility Mode Operations Chapter 10
Setting the “Black Image Density Correction” Function
This function is used to adjust the density of the printed image in black-and-white
copies.
(The default setting is the standard setting (middle setting).)
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Expert User Mode].
5 Touch [Black Image
Density Correction].
6 Touch and
to adjust the
image density.
7 Touch [Enter].
8 Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.
To Next Page
Loading...
