10.8 Administrator Settings
10
10-39
Utility Mode Operations Chapter 10
Setting the “Skip Volume Track (E.K.C.) Error” Function
This function is used to specify whether or not other jobs can skip a job that was
stopped because the maximum number of copies has been reached for the
account.
(The default setting is “No”.)
✎
Reference
For details on managing accounts, refer to “Supervising Machine Use (Volume
Track (E.K.C.) Functions)” on page 10-89.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [Skip Volume
Track (E.K.C.) Error].
6 Touch the key for the
desired setting.
7 Touch [Enter].
8 Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.
To Next Page
Loading...
