10.8 Administrator Settings
10
10-35
Utility Mode Operations Chapter 10
6 Touch the key for the
desired setting.
7 Touch [Enter].
8 Touch [Exit] in the next
three screens that
appear.
The Basic screen
appears again.
Setting the “Over Size Paper Selection” Function
This function is used to set the paper size for over size paper. (The default setting
is “12 × 18”.)
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Admin. Set.].
5 Touch [Over Size
Paper Selection].
To Next Page
Loading...
